-
Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your EcoDiesel truck!
- Post your own topics and reply to existing threads to help others out!
- We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
jdn112011's latest activity
-
The mileage is about right for that to a Give you a problem, this is what happened to my 2015 at 96, 000 miles. Their is a metal tone... -
jdn112011 replied to the thread Turbo oil line leak?.If yours is oil though typical it'd be oil through intake or exhaust, you have external so more inclined to look at drain line, grommet...
-
jdn112011 replied to the thread Turbo oil line leak?.Well for me it was implausible toque codes and some others. I thought maybe vgt actuator so ordered a salvage one, sucky job laying...
-
jdn112011 replied to the thread Turbo oil line leak?.End of the road? Sure you could treat it as a throw away but problems are most all solvable. Emissions intact you could have soot from...
-
jdn112011 replied to the thread 2014 Laramie Longhorn 4x4 Newbie.Yep there's recall for hardware replacement on tone wheel failure that should still be open even with aem update. W58 I believe. You've...
-
jdn112011 replied to the thread Service Electronic Throttle Control 2014 Jeep Grand Cherokee EcoDiesel.You need to document the codes not just clear them. They tell the story, at your mileage you're due to experience things like a seized...
-
jdn112011 replied to the thread Electrical Issue?.I'd assume these run an idle air control valve like any tbi but I'm not 100%. In my shitbox Days that would be the go to for your...
-
jdn112011 replied to the thread Electrical Issue?.Is there an actual problem, ie stalling while on brakes in gear? Or are you just bothered by the idle rpms you're seeing?
-
jdn112011 replied to the thread First thread with something to think about :) p062b, p0299, p1296.My experience, failed Turbo. You can remove the intake pipe and Access the actuator below the firewall, remove the e clip on the linkage...
-
jdn112011 replied to the thread Turbo Vane sensor A not reading..Late, but under the firewall side of the intake duct where the vgt actuator is likely unplugged.
