-
Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your EcoDiesel truck!
- Post your own topics and reply to existing threads to help others out!
- We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Latest activity
-
thisguyken replied to the thread Manual High Idle Capability?.Following! I use my truck for work and often times I'm in very cold conditions and leave the truck run or need to idle it up manually by... -
thisguyken replied to the thread Service throttle.I had this issue. Cleaned MAP sensor like you said. Was pretty carboned up. Still had the issue, basically no turbo and truck could...
-
Gggg123 replied to the thread Antifreeze leak on front.Thank you all, The water by pass tube had cracked bought it oem $129 came with both o rings.
-
-
Can someone please tell me what this is. I'm having the throttle issue and when looking at my truck I see this thing and a little... -
-
Ppcravens replied to the thread Driving and truck shuts down to limp mode.just pulled MAP sensor and EGR cross over pipe both in good shape very little soot on crossover pipe and MAP was clean
-
Ppcravens replied to the thread Service throttle.same issue but with lots of codes
-
RRicerocket27 replied to the thread New engine ordered.Thanks. By oversize beatings, do you mean wider, ie full with of the bearing support, or do you mean oversize as in crank grind? My...
-
PWas driving and the Eletronic Throttle Control came up. Pulled over tried a few things but no change i did not have my scanner with me...
-
biodiesel replied to the thread New engine ordered.The engine builders are using oversized bearings. Some use KING bearings and others are using M&K bearings. When the main bearing... -
I really wanted the transmission tune. I hated the way the stock transmission shifted. The truck runs good. The big difference for me is... -
RRicerocket27 replied to the thread New engine ordered.Certainly open to learning. What advice do you have about better bearings (given Dodge have discontinued standard rod and main bearings...
-
biodiesel replied to the thread New engine ordered.Do you take oil samples? If you're open to learning, you'll find out that bottom end failures on the EcoDiesel have nothing to do with...
-
RRicerocket27 replied to the thread New engine ordered.You're certainly entitled to your opinion. Mine is, oil is the life blood of any engine. Dirty oil is bad news.
-
biodiesel replied to the thread New engine ordered.EGR has nothing to do with engine failures. There are people with over 400,000 miles on their bone stock EcoDiesels. I tow a 7,000 lb...
-
RRicerocket27 replied to the thread New engine ordered.Interesting dilemma. I have a 2014 Ecodiesel Longhorn, and it's a great truck. I drive it 19,000 mile towing our 7000lb trailer around...
-
