• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results for query: tone crank sensor

  1. A

    FCA# Z46/ NHTSA# 22V-406

    Dude, had the same thing, i had my own ext. warranty. They replaced the tone wheel on the crank since it still run the throttle control. Est bill 700.00 without warranty.
  2. John Jensen

    My name is edgar

    If the crank sensor was bad the tone wheel could have came apart and took out the crank sensor, very common.. If that happened it could be under AEM recall extended warranty. There is also a W58 recall that was a software change to allow the truck to run if the tone wheel failed. His truck...
  3. jdn112011

    Damn Electronic Throttle Control!!!

    Yes sir that would be tone wheel or crank position sensor failure. You're at the target mileage.
  4. H

    2017 crank sensor/tone wheel

    I got the dreaded P0336 code last Friday and limped it back to the dealer. The recall associated with the tone wheel/cranks sensor did not apply to my VIN. I’m assuming because it’s a 2017, and the recall doesn’t include 17 and newer? Can anyone help verify that? Because it’s not affected by the...
  5. jdn112011

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    Motor dies no restart, dead crank position sensor so crank no start until diagnosis and transmission split for Repair. The tone wheel is cheap but sensor if damaged or just doing it while it's open was like 600$ as well.
  6. R

    Lost with my 2015 RAM😡

    Not sure what I can do anymore.... I've had this truck since 2018 and I've had a bunch of problems from 2 EGR's replaced to an intake manifold replaced ECU reprogrammed glow plugs replaced and last the crank position sensor tone wheel replaced...after the tone wheel was replaced I drove the...
  7. GearHead

    Crank no start ongoing

    I take the supply fuel pump to mean the lift pump from the tank, its looks good. The CP4 sounds OK for cranking although I see more like 28,000 psi while running. Can you scope the span width and pulse of the injectors while cranking? Try a shout out to GDE they have come up with a couple of...
  8. M

    Crank no start ongoing

    Truck has been down for 6 months. New tone wheel and crank sensor. New supply fuel pump. 60psi static. New CP4 pump. 9000psi while cranking. No metal was found in the fuel rails or lines. No codes. Except basic stuff when you unhook the battery to remove the transmission. I can check just...
  9. TC Diesel

    help please - crank, no start

    DO NOT paste and copy This for any other site USE, If I see it at 1500diesel.XXX I will deleted it Myself or have the Boostn or Temp delete it Dealer Service Instructions for: Safety Recall W58/NHTSA 20V-475Loss of CrankshaftPosition2014-2018(DS)Ram1500 Pickup2014-2018(WK)JeepGrand Cherokee...
  10. H

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    In discussion with my dealer here in Michigan back in April when I had the VB1 and W58 recalls completed, if the tone (i.e. reluctor) wheel fails and does not damage the crank sensor then parts and labor are not covered by the AEM extended warranty. The parts and labor would only be covered if...
  11. R

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    Stopped by the dealer yesterday to discuss the crank position sensor recall for my 2015 EcoDiesel. Asked if I could pay for replacement since the recall is a software fix to use the cam sensor, and I have no desire for another software update given how well the first two recalls managed to kill...
  12. GearHead

    Crankshaft position sensor

    Stealership absolutely. If they repaired the vehicle there is no way they should return it to you in "Limp Home Mode", that just sets the truck up for a cascade of DTC's. My 2014 finally lost it's tone ring magnet, replaced under AEM II warranty, I did have to pay for the tone ring as it was not...
  13. C

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    What were the main codes that showed up or lights? Would it crank after this happened?
  14. A

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    Does anyone have a old tone ring or know the pulse count on the ring? I have been studying this and think there is a way to mount a ring on the front crank pulley. Then mount the same crank position sensor with an extended harness on the front of the engine. I just need to know the pulse...
  15. H

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    Ok so back to the issue of the crank sensor fault caused by the tone wheel ring magnet delamination. Apparently there are 2 recalls, W58 and W68. Specifically the W58 fix which is a new PCM software flash but no actual physical parts are repaired/replaced. So if the crankshaft sensor loses...
  16. 2

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    I have a 2015 ED Grand Cherokee Overland that will crank but not fire at 61K miles and throwing the crank sensor code. Fortunately it happened while sitting in the driveway after a -19 degree cold spell. I plan to have it towed to the dealer tomorrow and expect to hear that reluctor is bad...
  17. F

    New member

    Sorry i didn’t respond sooner,im new to this forum thing anyway i took my truck in because of a service light on and i also asked them if they could take care of the egr cooler and cranksenser tone ring recall. I am a mechanic by trade so i know its not an easy job to do crank sensor ring...
  18. K

    Crankshaft positioning sensor and Tone Ring Failure on Eco diesel.

    Mine went out around 65,000 miles, kicked it down to pass a truck in slow traffic and I heard a pop and stopped running in the middle of the road and luckily it had enough momentum to get off the road, It had to be towed in and would not start and the code should crank sensor and the...
  19. 1shadowsabre

    2014 ecodiesel

    https://www.ecodieselram.com/forum/search/158093/?q=tone+crank+sensor&o=date
  20. W

    Limp mode

    Some were probably set from the tow but I agree with Tremper, looks like a bad tone ring or failed crank sensor.
Top