Search results

I don’t believe there’s been 200 engine replacements per month since this trucks inception. We’ve all seen the sheets Haul N Grass has posted. That number does not represent an average, nor does it prove anything really. Do you realize 200/mo is about a 7% failure rate? No way. It’s high for...

Do you mean a forced regen in Park? As far as I know, that’s only done with the Wi-Tech tools.... Mobile regen with my CTS2 is the only option. Although I’ve finished my share of regenerations sitting in my driveway. Sent from my iPhone using Tapatalk

You might want to include location, and which bed length you have. GLWS. Sent from my iPhone using Tapatalk

Well I cleaned the moving parts and sprayed them down with silicone as directed and that didn’t fix the problem. Was told by customer service the motors don’t usually fail and the next thing to try is adjusting a bolt on the frameside of the motor that pushes on a wedge inside the gearbox...

Yes that’s right, I have 59 million miles on my truck. Sent from my iPhone using Tapatalk

2015 59000k miles Nothing to report Sent from my iPhone using Tapatalk

I just got this exact same issue after almost 3 years as well. My passenger side has about an inch play in the motor when retracted, drivers side is still tight and solid. Was told to power wash it all down and spray with silicon first and report back. Been a week and I have done neither. But I...

I wasn’t aware crankshafts snapping as being an issue. Read of spun bearings being a big culprit to engine failures though. Sent from my iPhone using Tapatalk

How do you view the backup camera while going forward? Sent from my iPhone using Tapatalk

Vern has replaced his, around 350k miles or there abouts. I believe it was under $8k. Sent from my iPhone using Tapatalk

So 4wd Parts is advising replacing struts over a spacer to achieve a level stance? I’d go with that logic as well. Sent from my iPhone using Tapatalk

I stayed with the same size tires and went with the adjustable Bilstein 5100s and OEM UCAs to level out the front. Used the 2nd to highest notch for the setting and it’s close to level, maybe 1/2”-3/4” rake which is what I wanted. I’m not sure how that correlates with your tire size tho. I...

I put the 5100 bilsteins on my ‘15. Just be careful with the spring compressors and you’ll be fine. It’s a pretty easy job. I don’t remember any big hang ups that would give you problems. Let us know how it goes. Good luck. Oh, and don’t forget to adjust your headlights afterward. You will be...

I will delete mine after 1st emission problem as well. I’m in this truck for the long haul so it needs to be reliable. Sent from my iPhone using Tapatalk

Yes and long overdue IMO. Sent from my iPhone using Tapatalk

That’s good news for us! But I think FCA basically had to with half ton diesel offerings coming out by Ford and GM. Sent from my iPhone using Tapatalk

I like the Titan and think it’s dam solid from what I’ve gathered, mpgs aside. Plus I believe it’s the most American built pickup truck on the market. Good luck with it. Sent from my iPhone using Tapatalk

I agree. Although after the 2nd set of tires on them wears out I will go with a new and smaller wheel just for a new look. Sent from my iPhone using Tapatalk

Oh and go Bucks! And Happy New Year. Sent from my iPhone using Tapatalk

New logo? Do tell... That mean I need to change the sticker on my back glass? Sent from my iPhone using Tapatalk