Search results

Could have a cracked fuel rail or bad cross over line. One way to help find a leak like that is clean everything throughly then cover the rails and line with clean white rags. Drive it a little bit then inspect the rags. Just be mindful to not leave the rags there long as it is a fire hazard.

Its probably because they dont know what there doing so they bill as if doing a turbo replacement. The turbo replacement is heavy on labor and time. Almost exactly what they quoted you. But there is no need to pull the turbo for just the coolant line.

Why are dealerships charging customers that much? The hose is under the intake manifold and should only take a couple hours to change.

Engines are still spinning main and rod bearings even factory filled with 5W-40. Its more likely a maching error or poor bearing design issue. Some think it might be an oil pump issue but nothing definite there.

The Idash works great it has lots of preprogrammed pids that read on our trucks but well not force a regen.

Why not use 20W-50?

Gde well not sell you a product for a vehicle that’s registered in california. They did originally but carb put a stop to that.

Warn has everything you need wiring included.

How did you take the sample that can make a big difference?

There are LT tire choices in 275/60R20 but not factory options. Pro Comp at sport, nitto exo grabber, nitto dura grapper, all are an Lt rated tire with load range E. Bfg K02 is an Lt rated tire with a D load range as well. Any P rated tire well be prone to punctures if used off road its just...

Fuel additives are a smart choice to help protect your fuel system. The fuel in north america is lacking on lubricity and varies wildly on cetane. Some stations already treat there fuel but others do not personally I run Amsoil all in one diesel treatment through every tank just in case. Our...

Mainly because it is part of my remote oil cooler setup eventually I would like to replace the stock filter with a stainless steel mesh and just clean it to lower cost. Im going to be contacting a different company about building a custom oil cooler then I might change the whole setup again.

I do have a second oil filter setup on my truck but its a full flow filter not a bypass setup.

Its a small plug on the passenger side cylinder head towards the front. Unfortunately I dont have any pictures of its exact location or size. But it takes a allen head to remove it. The drain line might be tricky but you could tap into the fill neck itself instead of the cap.

Why not stick with the stock size and get a tire with an LT rating? There are two options that I know of probably more. One is pro comp at sport an excellent tire with a 60k warranty and is load range E. The other is bfg k02’s another excellent tire with load range D.

Oil analysis is an excellent tool which I recommend every use but it is not going to prevent failure just possibly help identify it. It well also not stop soot from traveling through your oil system which is extremely abrasive, bypass filtration well filter it out. Until one can prove every...

Wear metals are always being made in every engine. Without bypass filtration the small 2-20 mircons wear metals get pumped throughout the system until you change the oil. They then cause excessive wear with is why lots of industrial engines use bypass or dual pass filtration setups. The setups...

10K plus you really need to check your facts an entire replacement engine retails yes retails for 7K. If you shop around the engine replacement can be done for $7500 with labor. Now back on topic bypasss oil filtration is excellent for extending oil change intervals and for extending engine...

The three throttle press works sometimes but its not the actual way to reset the oil life on our trucks. In your owners manual pages 301 and 302 is the proper procedure. Im copy and pasting it below. Oil Life Reset Your vehicle is equipped with an engine oil change indicator system. The “Oil...

Pro comp at sport is a load range e tires in the stock 275/60R20 with a 60k tread life warranty. It would be an excellent tire for your application. Bfg k02 is another tire to consider in the stock size its a lt tire with a d load range in the stock size. Going to a taller tire well rob power...