Also haven't had an issue since changing #4. The others are imenant. My last post I was moving on to a coolant loss issue. A successful 3 way valve replacement and egr cooler delete later I am still adding coolant every fuel up. No puddles, oil is good. Dam turbo cooler hose I s'pose. Next step...
I would/ did. Well it was warm when I started. By the time I figured out how to get the hose off and actually identify the glow plug, it had cooled quite a bit.
Not at all. I'll be back under the hood again this afternoon to swap out 3 way coolant valve, so I'll try to get a good location pic posted. If I can figure that out.
#4 is on front driver's side. Pop engine cover off by pulling up then towards the front. Take the intercooler hose off, hose clamp in front and wire snap in back. To release the wire snap, practice up front near the hose clamp you just loosened. Use a pick or flat screwdriver to pull up on the...
Been lurking since I bought my 14 tradesman in October of 17 with 35k. Literally just walked in the house after changing gp #5. Having done the same procedure on my 07 jeep crd a year or so ago, I knew it was gunna be gut wrenching. Thank goodness it wasn't #6. 2 hours of soaking and very small...