MrB616
New Member
- Apr 16, 2025
- 9
- 5
- Truck Year
- 2014
My 2014 Ecodiesel giving me yet another headache. Last week jumped in to go to work. Turned the key, everything powered up like normal. Went to start and made 3 clicks like the battery was low. Tried again and it made a single louder pop sound. Made the same noise about 6 weeks ago when the starter went out. Tried a 3rd time and nothing. Changed the starter 2x now, new battery. Swapped every fuse and relay under the hood I could find related to start or ignition with my other Ecodiesel and still nothing. My other one started with every switch. Rebuilt the engine about 2000 miles ago. Fully deleted and tuned. Had self mechanical issues when I rebuilt it and had another ECU installed. I've even put the original ECU back in and still turn the key everything powers up like it should and turn to start and nothing during the start cycle. After is cycles says service 4wd. Even took the ignition key box out and plugged it into my other truck and that one started with it. Am I missing something?