New member

[Retro]

Brought a 2015 Ram with the Eccodiesel and love it. Threw a code for the particulat sensor. Truck has 84000 on it now and I figure I can fix it with the right info.

 

[CAVEMANN]

ALFAOBD and an MX+ OBD 2 DONGLE & you'll be good to go, check the thread here for MIL descriptions, there's also some copies of the factory manual floating around on some of the FORUMS.

 

[Retro]

ALFAOBD and an MX+ OBD 2 DONGLE & you'll be good to go, check the thread here for MIL descriptions, there's also some copies of the factory manual floating around on some of the FORUMS.

Thank you.

 

[BoostN]

Welcome.. @CAVEMANN is on point with his assessment. Keep us updated!

 

[Retro]

I now am the proud owner of the ALFAOBD app and should have the MX+ OBD2 DONGLE tomorrow. I have a question; should I pull the DPS sensor and clean it or just do a reset on the code and do a stationary region?

 

[CAVEMANN]

I would also recommend an EDGE INSIGHT, either 2 or 3 monitor, or SCANCAGE 2 to monitor vital engine functions. These engines like to be run on the highway, they seem to regen frequently and a couple of unfinished regens & it will give you th EXHAUST FILTER 80% FULL MESSAGE DRIVE AT HIGHWAY SPEEDS........., the two products I mentioned will allow you to watch things to know what's happening, there are others, I've used both of these and they work. Also gonna recommend a tune that will shut off the EGR, THERE'S A FEW OUT THERE.

 

[CAVEMANN]

I now am the proud owner of the ALFAOBD app and should have the MX+ OBD2 DONGLE tomorrow. I have a question; should I pull the DPS sensor and clean it or just do a reset on the code and do a stationary region?

You can try a REGEN, it may do it after you clear the code, not sure, I'd sure try it first.