Banks intake manifold install?

[TC Diesel]

Yes & No, YOU must check the Max operating Temp/Pressure Vs Running Temp pressure. Sure, it may take 350F but how long? that's why running Temp pressure is more important then Max Temp pressure in many cases.

 

[Saber]

the only dependable tunes right now r coming out of Canada all the good ones in the USA got shut down

what about gde tunes?

 

[Saber]

I have some step by step instructions to remove and reinstall manifold. If somebody needs it. It even has pictures.

hey can u email them to me? [email protected]

 

[willow]

Such great info on here. Thank you all that has contributed.
Would love to see a video on this still.
Do people actually torque the HP fuel line before tightening to the 75* .

 

[ejohanson]

I have some step by step instructions to remove and reinstall manifold. If somebody needs it. It even has pictures.

REALLY would love some step by step directions. Any kind of guide/video would be amazing because I’m finding nothing.

 

[Bradyhond]

Thank you for providing that! Much appreciated! I replaced the hose today and put on two stainless steel hose clamps. The coolant system has been at 15lbs pressure for about 2 hours now with no issues. I'll be putting the intake back on tomorrow after I give it a good clean.

Hi how u pull of the hose ?what kind hose u use thanks

 

[Bradyhond]

I believe it's 3/8ths, and I used crimp clamps, but it's really tight to get them seated down so if you use them make sure you have the right tool to crimp them from the side. You do not have to buy new fuel lines when removing the intake. When you take the turbo elbo off cut an Allen wrench down so you have just the top angle and just enough for it to bottom in the Allen head bolt.

Can u show what kind allen uwe need to remove elbow thanks

 

[dylanmautner98]

I've had the manifold off 4 times, and never replaced a fuel line once. Accentually installed the banks, and it will make a world of difference, simply because of deleting the swirl valves. I deleted the swirl valves on the factory manifold but ended up having a boost leak where the swirl motor is under the manifold" my fault in a rush" but the factory manifold is plastic junk. If you need step by step intake manifold removal just msg me. It's not bad at all just looks overwhelming. And you can reuse the gasket as well.

I just installed the banks manifold how did you put the bolt back in where the turbo elbow is. I can’t seem to get a socket on there.

 

[Augiedoggy]

I just bought my ram used this week but after reading this thread I checked my truck and sure enough it has a banks intake! still have no idea whos tune is on it though.

 

[Dlazar]

anyone installed the banks intake manifold. Currently deleting everything and have been able to find install help on egr and exhaust but nothing on the intake manifold anywhere

Did my 2015 January this year. Great product.Be sure to have tune to delete swirl valves

 

[Cruzer512]

I have some step by step instructions to remove and reinstall manifold. If somebody needs it. It even has pictures.

Do you happen to still have those instructions?I have everything apart including the turbo. I'm at the fuel line part. Thanks.

 

[GC Diesel]

This link is to FCA technician instructions for EGR cooler and intake replacement.
it’s not the greatest, It’s for a Jeep but might help.

https://static.nhtsa.gov/odi/rcl/2020/RCRIT-20V699-5780.pdf

 

[GC Diesel]

Also looked up the part numbers quoted in this recall and a mighty reasonable price is being quoted for the intake and gaskets. Also looked up the other part numbers and also reasonable prices.

 

[GC Diesel]

Well, I bought one of these to replace mine instead of cleaning it. Intake comes as a complete unit with all gaskets and sensor in place and ready to install. $180 well spent.

 

[CAVEMANN]

Y'all will need a tune to turn off the swirl valves if you go to the Banks intake.

 

[Jaski]

Did my 2015 January this year. Great product.Be sure to have tune to delete swirl valves

Which tune did your swirl valve and throttle body delete?

Y'all will need a tune to turn off the swirl valves if you go to the Banks intake.

Who tunes this option?

 

[CAVEMANN]

Which tune did your swirl valve and throttle body delete?

Who tunes this option?

Try Mrtuning out of Canada, BUT I'm not 100% sure.

 

[RamRod413]

Well, I bought one of these to replace mine instead of cleaning it. Intake comes as a complete unit with all gaskets and sensor in place and ready to install. $180 well spent.

I am looking to replace mine now. They are 649 on eBay and 849 on other sites!!

 

[Augiedoggy]

I believe he is talking about a mopar replacement and not the Banks.

I am looking to replace mine now. They are 649 on eBay and 849 on other sites!!

 

[Bob S.]

Any updates on the Banks 630 T intake manifold install , other equipment need and how does the engine run in summer and cold winters!
Cat converter seems to failing and I am wanting to eliminate the system completely, it so useless down here in MX where speeds are only 80 K/hr most of the time requiring a burn every two days for the carbon canister!