Data NO on rotating mass Failures, Yes on the fires, leaks , Plenum , Turbo , Warped Valves. It simply is Hero Zero motor, But it has extremely high failure rates on Components, like Tone Ring / Cranksensor , Glow plugs , Turbo , DPF, etc. It's just European Design, Over Engineered and under...
My 2014 ecodiesel is now at dealership after red lightening bolt came on and truck bogged down on acceleration in traffic. I did get to work, but it then hesitated to start, but would. Had it towed to a shop and was told it was a crankshaft issue- they recommended taking to dealership. Just got...
No it just cranks over and over it won't start.
Two dealerships and Dodge have said it's not part of a recall.
My tech is going to document the tear down with photos if there is a desalination they will document it.
It could just be the sensor.
We will see.
I got the W58 recall done August of 2020 and Saturday I got the P0336 fault code for crank shat position sensor. Now trying to call everyone at FCA to try and get my tone wheel replaced under warranty. W58 was a BS “fix” only so you can limp your truck to the dealer. There’s supposed to be a W68...
Cool that you did it; but it's a recalled and warrantied repair. You may be able to submit for reimbursement on the parts but because you did it yourself you're limited.
It's unfortunate that it's a trans split job for tone wheel/crank position sensor but every Truck out there will be...
Update. Back on the road! To no surprise the tone ring was the issue. Bought the replacement for $25 and had a shop do the work for a fair price. Onto tuning next! 😁
Thank you. Yes I believe the tone ring is the culprit and I have one on order. My vin was not included in the recall unfortunately. Since my post I have removed my starter and inspected the ring with an endoscope. Oddly the ring looked okay. No cracks or gaps. So I’m continuing my search For...
You make my most analytical day seem simple. Keep it simple. Yep the Crank Position Sensor and Ring. One of the reflash recalls was to supplant the Crank Position Sensor as primary to the Camshaft Position Sensor, this was supposed to allow you to limp in when the CrankTone Ring grenades (as...
Hi all! New member and owner of a 2016 ram bighorn ED with 120k (as of feb-2022). Overall In the short time I’ve had it I’ve been pleased with the vehicle. Recently I became a student and victim of the apparently common lightning bolt, “service electronic throttle control”. I know there are many...
Dude, had the same thing, i had my own ext. warranty. They replaced the tone wheel on the crank since it still run the throttle control. Est bill 700.00 without warranty.
If the cranksensor was bad the tone wheel could have came apart and took out the cranksensor, very common.. If that happened it could be under AEM recall extended warranty. There is also a W58 recall that was a software change to allow the truck to run if the tone wheel failed. His truck...
I got the dreaded P0336 code last Friday and limped it back to the dealer. The recall associated with the tone wheel/cranks sensor did not apply to my VIN. I’m assuming because it’s a 2017, and the recall doesn’t include 17 and newer? Can anyone help verify that? Because it’s not affected by the...
Motor dies no restart, dead crank position sensor so crank no start until diagnosis and transmission split for Repair. The tone wheel is cheap but sensor if damaged or just doing it while it's open was like 600$ as well.
Not sure what I can do anymore.... I've had this truck since 2018 and I've had a bunch of problems from 2 EGR's replaced to an intake manifold replaced ECU reprogrammed glow plugs replaced and last the crank position sensortone wheel replaced...after the tone wheel was replaced I drove the...
I take the supply fuel pump to mean the lift pump from the tank, its looks good. The CP4 sounds OK for cranking although I see more like 28,000 psi while running. Can you scope the span width and pulse of the injectors while cranking? Try a shout out to GDE they have come up with a couple of...
Truck has been down for 6 months.
New tone wheel and cranksensor.
New supply fuel pump. 60psi static.
New CP4 pump. 9000psi while cranking.
No metal was found in the fuel rails or lines.
No codes. Except basic stuff when you unhook the battery to remove the transmission.
I can check just...
DO NOT paste and copy This for any other site USE, If I see it at 1500diesel.XXX I will deleted it Myself or have the Boostn or Temp delete it
Dealer Service Instructions for: Safety Recall W58/NHTSA 20V-475Loss of CrankshaftPosition2014-2018(DS)Ram1500 Pickup2014-2018(WK)JeepGrand Cherokee...