Search results

Just did the whole procedure on my 2015 Laramie. What an awesome upgrade for under $100.00. Bought the recommended FOB from Amazon as well as the 1K ohm 1 Watt resistor hooked up AlfaOBD and in 20 minutes I have factory remote start. I followed Boosted directions to a tee on both his videos and...

Did you get this fixed???

Did you figure this out???? I'm in the same boat....truck down for 3 months still no fux

Im hoping a new tune can fix. So far over a dozen new files from SFT have not worked. Looking at HP Tuners or MRTune

I'm starting to lose my $#&% with my EcoD. Here's my story....Back in June my truck stopped working.....would start for a sec then shut off...no codes. Local Dodge dealer did diagnostics and came back with tone wheel being the culprit. They replaced the tone wheel and sensor and was estatic when...

Yes....I've had some great input from John. Thanks TC....have a great weekend

Thanks TC ......SFT sent me a new tune that was supposed to be W58 compatible.....Frank from SFT took an uploaded tune file from my truck with the W58 installed and made the current tune I'm now having problems with. What does recovery software entail? Can this be done without sending in my ECM...

Sorry....yes the SFT was loaded when W58 was flashed.

Yes....I installed my new SFT file at the dealership after W58 and tone wheel repair

Just another question....I'm seriously considering just deleting the electronic throttle altogether and installing a Banks throttle delete plate/block and having SFT retune with the Electronic Throttle turned off. Any thoughts if this would end the SETC message from ever popping up again?????

Just got my truck back from getting the tone ring and sensor replaced.....covered under the FCA extended warranty thankfully. My truck is SFT Stage 2 tuned with full delete from the turbo to the tips. It's never thrown any codes until today after reflashing an updated tune to go with the dealer...

Just wondering why the SETC message would pop up on a Stage 2 tune with throttle delete. I thought deleting the stock electronic throttle for the Banks throttle delete and having the tuner remove it from ECM would make it impossible for any DTC's regarding the Electronic Throttle Control let...

SFT Stage 2 tuned since 2019....total delete....straight piped from turbo to tips including muffler delete pipe. Love my trucks performance and awesome turbo sounds. I get positive comments all the time for how awesome it sounds without being obnoxious. One other thing thats pretty cool is that...

Feel your pain my man. Similar issue....no start...no codes....2 weeks down waiting for parts!!! Tone Wheel and sensor just replaced under FCA warranty recall. Luckily my local Dodge mechanic had already been through this scenario with a few Eco's and sure enough the tone ring magnet material...

Just informed by dealership that my 2015 Laramie 4x4 has a broken tone wheel. Truck wouldn't start....no warnings...no codes...no CEL. They're installing the recall notice software update but not replacing the tone wheel. Is this the correct procedure? Sounds like a Band-Aid fix to me. How can...

well that didn't last long..... I actually did get it to start on the 10th or so try and it ran and idled normally for a minute or so then died.....back to no start..... same symtoms....tries for a second then shuts off. My HPFP is making a slight hissing air leak kinda sound when I let the fuel...

Thanks Eric. I'll go get a proper battery test done

Hey Eric, I should have mentioned that I did try a jump start.....battery showed 13V on EVIC while hooked up to other vehicle and I noticed the drop to 10V when I tried to start. Is this the normal sequence? Thanks for your reply...Really appreciate the input Cheers

Well, I go to get my truck with our local tow truck driver and he wants to have a listen so I try to start it half a dozen times ....same issue. He immediately thinks its a key fob / security issue the way it just cuts off with no CEL or codes on reader. So we disengage the transmission lock...