This past weekend I drove my truck down to VA for a track day. All the gear and bikes probably came out to around an 800 pound payload. Happy to say the truck had no problems whatsoever. I did about 23-24 MPG down and I don't really take it easy. I did not use cruise as I usually see better...
That should work fine man. I'm running the 20x10 with -24 offset on my 5100s with no problems at all. Ride is great and truck looks mean. The -24 will give you that stance too. The only problem you'll have with the setup is not enough room in the truck for the all the ladies it'll be getting you
5w30 is thinner than 5w40 so the 40 will take a little longer to get up to temperature. The thicker an oil is the longer it will take to get to its warmer, less viscous state. That being said, I noticed the change in pressures(just the dash reading) upon first start up after change the oil when...
Yes I understand that and I only use it for reference. Regardless of the unit being bogus or not, anyone who made the switch to rotella will see higher oil pressure in a cold engine inherently
I'm curious as to everyone's cold weather start up routines. Do you let your truck idle a bit? Plug in? I typically plug in below freezing and usually let it idle a for a few minutes. With the rotella and a cold engine, I usually see oil pressure anywhere from 45-55 psi on start up. Once it's...
I'm running 20x10 Moto metal MO962's with -24 offset wrapped in 305/50r20 cooper h/t plus. Bilstein 5100 adjustable level set at 2.1. No rubbing no trimming.