My truck driver side was leaning on the driver side. When I started truck nothing changed so i figured the air pump and manifold block was bad. It did give me a suspension code. I bought a new pump and block replaced them and now I have no codes but my truck front is like a low rider and the rear is low also and still do not here the pump coming on But there are no codes. What else do i need to do or look for. Thanks
-
Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your EcoDiesel truck!
- Post your own topics and reply to existing threads to help others out!
- We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
2017 air ride pump and air block replacement
- Thread starter pcravens
- Start date
GearHead
Active Member
- Sep 13, 2016
- 389
- 137
- Truck Year
- 2014
I just finished reinstalling my air ride system after three years on Monroe replacement system. I would ask what scanner did you use? What nitrogen pressure did you fill to? Did you re-calibrate the level sensors? My new pump is so quite inside I don't know it is running.
Good Luck.