35×12.50x20LT grapplers

[Ghe]

Looking for suggestion or tips, wanted to put the 35x12.50x20LT tires on my stock 20" rims 2016 model..do i need a levelling kits or just a spacer thanks.

 

[RobSchmidt]

Looking for suggestion or tips, wanted to put the 35x12.50x20LT tires on my stock 20" rims 2016 model..do i need a levelling kits or just a spacer thanks.

In my opinion, these trucks sit too low...get a lift bro, then slap those 35’s on...6 inch is what I have

 

[LuisW35]

I agree, i have 33” with a leveling kit on 20” and that’s a good fit, anything bigger get a lift

 

[RobSchmidt]

Here is what mine looks like

 

[LuisW35]

It looks great and i Can see how low your saying. Here is mine with 33”

 

[Stormy]

It looks great and i Can see how low your saying. View attachment 1904Here is mine with 33”

Looks great will have better fuel economy on 33’ or 35’ still looks aggressive enough and all without a lift!

 

[Dcalgo]

It looks great and i Can see how low your saying. View attachment 1904Here is mine with 33”

This looks amazing! Which leveling kit did you use?

 

[LuisW35]

This looks amazing! Which leveling kit did you use?

No name brand, but it was 2” and it’s 2wd not 4x4

 

[Dcalgo]

No name brand, but it was 2” and it’s 2wd not 4x4

Ah... good point. I have the 4wd and am currently researching level/tire combos. Your picture makes a very good argument for 2in lift with 33 tall tires!

 

[Hawaii_Built]

33"s and a nice leveling kit make the truck very well proportioned. When contemplating a small lift and tires, I highly considered Bilstein 5100 adjustable struts for the front, a set of ICON upper control arms, Bilsteins shocks in the rear, and ICON coils in the back. This would net about 2.8" of lift in front, and 1.5" in the rear.

I ended up going a route similar to RobSchmidt up above. 6" BDS lift, Bilstein 5100s on all 4 corners, and Timber Grove air bags with 35" tires mounted on my 20" stock wheels.

 

[BoostN]

Looks great!

 

[Tremper126]

Rocking 35/1250r20’s on stock wheels with 1.5 spacers.... 2” rough country leveling kit. I had to space it out because at full turn it would rub the control arms and the inspector didn’t like it.

 

[LuisW35]

It looks great and i Can see how low your saying. View attachment 1904Here is mine with 33”

Unfortunately This truck was totaled after i was rear ended. Good news that i got a new truck and I was able to get another ecodiesel.