Cargo Bed Divider Part Number : 82215481

[njoconnor]

Wondering if anyone has one of these. I'd like to know how close the bottom of the divider extends to the floor of the truck bed. I'm thinking of getting a Bedrug impact mat (3/4" thick), and I'm wondering if the divider will clear it.

Thanks. Pix of the new truck soon, I promise.....

 

[Tremper126]

I have one but I don’t have the ram box. I think it sits flat on the bed with little feet

 

[njoconnor]

Sounds like I'll skip it, unless there are adjustments to the feet. I don't have the Rambox either; according to the dealer, it's not needed for the divider, but the cargo management package (side rails with movable tie downs) is required, since the divider rides on those rails.

Thanks. If you find there's a way to adjust the clearance between the divider and the truck bed, I'd appreciate a post.

Just got the impact mat yesterday, but it's too cold in Wisconsin to apply the adhesive activator. Maybe next week....

Neil

 

[Tremper126]

I took a few pics, you can unscrew the feet and it should sit flat. Not sure your location but it’s free if you want it lol

 

[Bitta]

LOL...snag it if he's serious - they sell on Ebay for $$$$.

 

[njoconnor]

Tremper....thanks. I've done some further digging, and it turns out the bed side rails were changed for the 2020 trucks, so I'm not sure your divider would fit the current rails. No feet on the current divider, and it's hard to tell from the install manual whether it sits flush or not.

Guess I'll call a couple dealers, see if one's in stock, and go toss a tape measure on it.

Thanks again

Neil