• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

EcoDiesel Fuel Filter changes

We would really need an entire new setup right? As we are running a cartridge housing...unless the cat filter is similar in size but I'm assuming it's spin on so we would need a new head...I am not opposed to these ideas at all and actually I'm very tempted to put a prefilter in from one of our CASE tier 4 engines that are running the same injection pump we are...

Something like this. A machined adapter for a cat spin on. The adapter just connects the filter head to the existing fuel system.

NIC-CATADPT-2.jpg
 
I did that the first week I owned my truck. Has worked perfect the past 133000 miles. And my post filter has stopped a lot of small stuff from going into my injectors. I run a 2 micron post filter
So by the sound of it you are running 3 fuel filters? Pre, factory, and post? Paranoid?
 
why would you mess with the original filter? has there been failures do to the factory set up? i think that would void the warrant. and if it is the cost factor the ome filter is about 30 bucks every 15000 miles are we getting that cheap?
 
Back
Top