Enlight HID for 2015

[Connie]

I don't have the air.. and after watching the video it is more just little tight work that would make it time consuming.. but what is the plug and play part of it.. I didn't see that covered in the video.

 

[jdn112011]

This is the upgraded ballast.

And you are right about the fog lights. That's why most people opt for the ribbon style led because it can be stuffed inside and the ribbon is a flexible heat sink. I'm going to ask about this fitment in the housing tomorrow.

And actually the grill removal is very simple, remove the plastic cover between the Hood latch and the grill. It's just push pins holding it on. Then there are 4 10mm bolts on top and then you just pop it off. The two middle fasteners come off easily but I use a panel trim tool for the bottom (a plastic pry bar) and put it between grill and headlight and push the top back. It pops the bottom fasteners out no problem. Then 2 bolts for each headlight and a tricky lock accessed from inside the access panel in the fender well.

I guess I will have to put together a DIY!

 

[jdn112011]

Here is the Retroshop video of how I did the install. I hope this helps.

Except enlight actually uses the right bulbs. No trimming. Just plug and play

 

[Connie]

I don't need a light bar it is just more of wanting one.. I have 30 acres of property and it is dark out there.. Yours look almost like it belongs there in the pictures a random person would not know it is an add on.. I will have to take a good look at the truck tomorrow to get a full idea of how this works...one disclaimer on one page of the online store say if you don't know what you are doing have a professional. do it.. but it does't hard just tome comsuming

 

[jdn112011]

I don't have the air.. and after watching the video it is more just little tight work that would make it time consuming.. but what is the plug and play part of it.. I didn't see that covered in the video.

His video is shown on a gasser which is different under the Hood because we have a much different cooling system intake etc. And installing the ballast in the headlight housing's means you only need to mount the resistor and run the harness from the battery. That is what simplifies the system.

Now that I know what I'm doing I could throw in a system in an hour and a half.

 

[jdn112011]

I don't need a light bar it is just more of wanting one.. I have 30 acres of property and it is dark out there.. Yours look almost like it belongs there in the pictures a random person would not know it is an add on.. I will have to take a good look at the truck tomorrow to get a full idea of how this works...one disclaimer on one page of the online store say if you don't know what you are doing have a professional. do it.. but it does't hard just tome comsuming

That's exactly it. Not hard. Just time consuming.

 

[Connie]

I am watching the 2nd video now..I watched the one on the lights web site.. the one you posted is even better.. I was wondering about the water proof part of the head light and if this would leave moisture to get in but they covered that..

 

[jdn112011]

I just trimmed it as small as I could. A tiny touch of silicone and it's perfect for me.

 

[Connie]

Thanks for posting all that.. I think not only me but others would like this.. I rely on reviews and others thoughts alot before purchasing things I am not familier with this looks like a nice product.. another good example that even tho our trucks already rock.. there are other ideas and products that can just make it even better.. and more fun

 

[Watersupply189]

So I actually have a brand new light bar same as this in box I've never opened. I'm considering removing mine as it is currently. It was kind of an inexpensive alternative to the HID at the time. It does fit up great with the shape of the bumper.

If anyone were really serious about wanting it I would maybe be willing to trade air dams so you could have one notched for the brackets already and only have to drill the two holes. And install a switch.

I just have less of a use for an off road light. I need high output lighting I can use while on road all of the time hence why I reconsidered keeping it though it is nice where it is.

View attachment 379 View attachment 380

jdn, do you still have this bar light and if so what are you asking for it?
Thanks

 

[jdn112011]

Paid 200, not sure what it would cost to ship anywhere. Make a reasonable offer considering.

Brand new still boxed and packaged.

 

[Watersupply189]

Paid 200, not sure what it would cost to ship anywhere. Make a reasonable offer considering.

Brand new still boxed and packaged.

Is there a way we can private message on here to discuss instead of this thread? I'm new on this site and I'm still trying to figure everything out on here...

 

[BoostN]

Is there a way we can private message on here to discuss instead of this thread? I'm new on this site and I'm still trying to figure everything out on here...

Just click the User name, and choose "Start A Conversation". Conversations are "private messages".

 

[Watersupply189]

Just click the User name, and choose "Start A Conversation". Conversations are "private messages".

Ok thank you

 

[jdn112011]

Day (or a year) late and a dollar short but here's a lil snap shot!