• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Exhaust filter

James T

New Member
Sep 3, 2019
1
0
Truck Year
2016
I received a message saying my filter was at 90% full and it was correcting itself is this or do i need to look at replaceing the filter
 

TC Diesel

Well-Known Member
Jul 14, 2016
2,489
711
Truck Year
2015
I received a message saying my filter was at 90% full and it was correcting itself is this or do i need to look at replaceing the filter

You need to drive it at Hwy speeds for 8-12 miles ASAP if it reaches 100% you will trigger limb mode and Need stationary de-sooting requiring WITECH.....Go on Hwy ASAP and DRIVE HWY SPEEDS.
 

cds13ca

Active Member
Jun 19, 2019
217
76
Truck Year
2016
I received a message saying my filter was at 90% full and it was correcting itself is this or do i need to look at replaceing the filter
Also read the owner's manual, under REGENERATION so you have a good understanding of what is happening with a diesel particulate filter. Or ask questions here, there's lots of help.
 

John

Well-Known Member
Nov 13, 2015
1,186
386
I received a message saying my filter was at 90% full and it was correcting itself is this or do i need to look at replaceing the filter
No you do not have to replace the filter. If you didn't drive enough to complete the last few regens you will get this warning to drive at highway speeds until the regen completes.

Here's some info. from the owners manual.

Intervention Regeneration Strategy — EVIC

Message Process Flow


This engine meets all required diesel engine emissions

standards. To achieve these emissions standards, your

vehicle is equipped with a state-of-the-art engine and

exhaust system. These systems are seamlessly integrated

into your vehicle and managed by the Powertrain Control

Module (PCM). The PCM manages engine combustion

to allow the exhaust system’s catalyst to trap and

burn Particulate Matter (PM) pollutants, with no input or

interaction on your part.

Additionally, your vehicle has the ability to alert you to

additional maintenance required on your vehicle or engine.

Refer to “Electronic Vehicle Information Center (EVIC)”

in “Understanding Your Instrument Panel” for further

information.

Exhaust System — Regeneration Required Now

_Exhaust Filter XX% Full Safely Drive at Highway

Speeds to Remedy_ will be displayed on the Electronic

Vehicle Information Center (EVIC) if the exhaust particulate

filter reaches 80% of its maximum storage

capacity. Under conditions of exclusive short duration

and low speed driving cycles, your Cummins® diesel

engine and exhaust after-treatment system may never

reach the conditions required to remove the trapped

PM. If this occurs, the “Exhaust Filter XX% Full Safely

Drive at Highway Speeds to Remedy” message will be

displayed in the EVIC. If this message is displayed,

you will hear one chime to assist in alerting you of this

condition

• By simply driving your vehicle at highway speeds for

as little as 45 minutes, you can remedy the condition in

the particulate filter system and allow your Cummins

® diesel engine and exhaust after-treatment system

to remove the trapped PM and restore the system

to normal operating condition.



Exhaust System — Regeneration In Process Exhaust

Filter XX% Full
— Indicates that the Diesel Particulate

Filter (DPF) is self-cleaning. Maintain your current

driving condition until regeneration is completed.



Exhaust System — Regeneration Completed — This

message indicates that the Diesel Particulate Filter

(DPF) self-cleaning is completed. If this message is

displayed, you will hear one chime to assist in alerting

you of this condition.



Exhaust Service Required — See Dealer Now — This

messages indicates regeneration has been disabled due

to a system malfunction. At this point the engine

Powertrain Control Module (PCM) will register a fault

code, the instrument panel will display a MIL light.



CAUTION!

See your authorized dealer, as damage to the exhaust

system could occur soon with continued operation.




Exhaust Filter Full — Power Reduced See Dealer

This message indicates the PCM has derated the

engine to limit the likelihood of permanent damage to

the after-treatment system. If this condition is not

corrected and a dealer service is not performed, extensive

exhaust after-treatment damage can occur. To

correct this condition it will be necessary to have your

vehicle serviced by your local authorized dealer.



CAUTION!

See your authorized dealer, as damage to the exhaust

system could occur soon with continued operation.
 

carlhenry

Well-Known Member
Nov 21, 2018
1,506
284
Truck Year
Not Listed
It is a filter for soot it is replaceable but it is probably two thousand dollars tune it and end your problems Welcome to the forum
 
Top