Althecraneguy
New Member
- Mar 26, 2019
- 11
- 0
- Truck Year
- 2017
Awesome. What cover are you using? Any issues accessing the little tool box?that is the same tank I have in my bed with a tonal cover over it works great
I would lose the galvanized pipe & fittings, I won't use galvanized for any fuel or oil.Until you get a cover on that bed , correct that nozzle ,Facing upwards C'mon.
If theirs enough room use this filter when you change it out AE-3AZL. I change Mine Once every 24 months .. the only exception to this is when it the filter shuts down the Pump Flow, it will eventually curtail the flow 100%... Thus you never need to worry. Using the Zinga will allow you to run Your factory Filter to 50K miles or 2 Years...I change My 2003 5.9 Factory filter 3 times in 141K miles and 12 Years.
View attachment 1987View attachment 1988
Look at the Diamondback cover. It mounts on the bed rails like a shell and is approx 4-5 " above the bed.Can't have a work truck without a transfer tank. 51 gallon rds tank with 15 gpm pump. I'm not familiar with how bed covers are mounted. Do y'all with bed covers think I have room for one or is the tank too tall?
I've been told that about galvanized piping since I was a youngster, I'm 65 now, personally I wouldn't do it except as a last ditch option.High quality Galvanized Piping is fine ,You are correct on Mexico/China piping.
That Piping is 7 Years old, The gallon counter stop working and I needed to fix it, The Piping was clean, Not rusted or the black flakey thats accustomed to Cheap Piping. Caveman I know what you're talking about. I change out this Pickup tube back in 2013 because of the poor quality material used. We use 1000s of FT piping every year for another Business I Partially own. Also We are Parker Distributor if that piping had any risk I would replace it.
View attachment 2689