Message...."Service Electronic Throttle Control"....No codes & SFT

[EcoLeesiel]

We came to the conclusion that tuners are writing out that DTC code for EGT as it didn't appear on my scanning tool for my SFT tune, HP Tuners, or MRTune when installed on my truck. Throw the stock tune in and it's there among the 20 plus other codes and we missed it as did the 3 other mechanics who "worked" on my truck. A shop in Ontario reached out to me through FB as they had the identical scenario on a freshly tuned Ecodiesel and spent countless hours trying to solve. Ended up whoever did the tune unplugged EGT #1 and once plugged in voila problem solved. Hope this helps... cheers

 

[2018bighorn]

We came to the conclusion that tuners are writing out that DTC code for EGT as it didn't appear on my scanning tool for my SFT tune, HP Tuners, or MRTune when installed on my truck. Throw the stock tune in and it's there among the 20 plus other codes and we missed it as did the 3 other mechanics who "worked" on my truck. A shop in Ontario reached out to me through FB as they had the identical scenario on a freshly tuned Ecodiesel and spent countless hours trying to solve. Ended up whoever did the tune unplugged EGT #1 and once plugged in voila problem solved. Hope this helps... cheers

Hopefully you’re still active. I’m also in Ontario. Anyway you have that shop info? (Message me if possible) I just did MR tuning (stage 2) last week full delete with exhaust. Cut all sensors from downpipe on. Didn’t touch egt#1 sensor. Since the tune deactivates all the other sensors and they were near impossible to take off I just cut them all off. And then tonight. service throttle message came on, only 200 km after doing the tuning no engine light no codes so I’m wondering if I’m having the same issue as you