-
Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your EcoDiesel truck!
- Post your own topics and reply to existing threads to help others out!
- We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
New to this
- Thread starter Gerald30
- Start date
Karolus007
New Member
- Feb 4, 2022
- 6
- 2
- Truck Year
- 2015
Any luck fixing it?
- Feb 15, 2019
- 960
- 348
- Truck Year
- 2014
You need to check engine codes….. that bolt could mean anything.
Karolus007
New Member
- Feb 4, 2022
- 6
- 2
- Truck Year
- 2015
SFT tune no code just service electronic throttle control. So far I cleaned the MAP sensor. I’m going to do a smoke test next to see if there is any leaks. Truck has been running great since the tune(stage 2). Occasionally when I turned it on it would show that light but quickly turn off and work fine. Now all of a sudden it’s on and staying on. I did send SFT an email, waiting on response. Also ordered a MAP sensor and a gas pedal. Both pretty cheap so I figured I’d give it a go and see what happens.
Karolus007
New Member
- Feb 4, 2022
- 6
- 2
- Truck Year
- 2015
So I kept on tinkering around before my parts came in decided to hook the OBD reader up. There was no codes, but I ended up hitting erase anyway. It cleared the issue! I have boost again. So only thing I’ve done was clean MAP sensor/turbo boost sensor. Also cleaned a sensors inside the throttle body looking thing( where the inter cooler pipes connected up front). Just a twist of sensor, easy to take out and clean. Hopefully I can roll for a while now.