owners with engine monitors, whats your boost?

[AzRamDiesel]

For owners with a CTS or scangauge, etc.. what is your boost numbers?

 

[moparecodiesel]

Completely bone stock you should be a max of 24psi, 14-17psi nominal, with the complete mass air sensor mod, and all the intake mufflers removed, intake and hot side and zero tuning I hit a max of 26psi and 16-23 psi nominal.

 

[Razzaa]

Completely bone stock you should be a max of 24psi, 14-17psi nominal, with the complete mass air sensor mod, and all the intake mufflers removed, intake and hot side and zero tuning I hit a max of 26psi and 16-23 psi nominal.

Mass air sensor mod? Intake mufflers removed? How? Where? What is this goodness you speak of?

 

[moparecodiesel]

Look at the complete afe blade runner kit, I followed the same design, just made my own kit for $200. Instead of their $1600 system

 

[BoostN]

Look at the complete afe blade runner kit, I followed the same design, just made my own kit for $200. Instead of their $1600 system

Like the system in this image gallery?

http://www.ecodieselram.com/forum/showcase/ts-performance-ecodiesel.3/

 

[moparecodiesel]

Yeah but I did mine the poor mans way, but I also removed two of the restrictors in the mass air sensor.