kresdelcar
New Member
- Mar 11, 2019
- 2
- 0
- Truck Year
- 2014
I am attempting to remove the particulate filter to clean, I removed 2 of the 3 bolts in the front, the 3rd bolt stripped off. At that point, I was only going to pull where the egr filler and sensor was away from the particulate filter and blow down the road to give the engine some breathing room, but I cannot now get the 3rd bolt off. I would take all of it off if I could find a tuned ecu or ecm, whichever it is called. Any advice?