• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Programming Accelerator Pedal

LGSteggy

LGSteggy

New Member
Joined
May 31, 2022
Messages
1
Reaction score
0
Truck Year
2015
I have a 2015 that has been deleted been running great for 2 years since delete. Got an ETC message a couple of days ago. It was throwing codes P0198 & U1424. Cleaned the MAF sensor but didn't fix it so I went ahead and replaced the MAF sensor & Oil pressure sensors. Still having issues so I'm replacing the Accelerator Pedal. Its an easy swap but I can't seem to get the new accelerator pedal to sync with the truck. I have tried putting it to run and holding the accelerator down for 15 seconds & beyond, turning it off then starting it but to no avail. I have also tried disconnecting the battery for a bit. Does anyone have any ideas on how to get this to sync up to the truck? Thanks
 

Attachments

  • scs truck.jpg
    scs truck.jpg
    111.6 KB · Views: 2
AlfaOBDII, relearn parameters for new pedal module. The measures you have taken will be insufficient to achieve what you need to do. Since you have a deleted truck it may pay to have the AlfaOBD scanner at the ready for future use.

Good Luck.
 
You must log in or register to reply here.
Back
Top