• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Random shut off

Korsch

New Member
Dec 29, 2018
28
8
Truck Year
2018
Hi everyone,

today durning my lunch breakI drove to the gas station which was probably about a 5 min drive, everything was good for out did my thing and when I got back in my turn and turned it on it started then probably within 2-3 seconds shut off. The dash was completely black, no lights nothing but my touchscreen was trying to connect to Bluetooth.The key was in the run position so I turned it all the way to the left and then back to the run position and it didn’t even turn over or light up the dash, wasn’t until I pulled the key out and opened the door and closed it was I able to start the truck.

very curious if anyone has had this issue and what the remedy was.
Thanks everyone.
 

Tremper126

Moderator
Staff member
Feb 15, 2019
960
347
Truck Year
2014
Sounds like your ignition system hit a glitch. Did you end up getting it running?
 

Korsch

New Member
Dec 29, 2018
28
8
Truck Year
2018
Yea once I opened my door with the keys out of the ignition and then closed the door and turned it over it started not problem.
I commute long distance for work and don’t want it to happen worse when I’m in a rural area.
 

Tremper126

Moderator
Staff member
Feb 15, 2019
960
347
Truck Year
2014
I’m sorry boss I haven’t heard of this senario. IMO the ignition hit a glitch and didn’t know how to act so it shuts off and required basically a forced start.
 

s0231198

New Member
Jan 15, 2020
4
1
I have had something like that happen a few times, I think it's however the key reads in the ignition switch, it doesn't make the connection. I just pull the key back out and give it a few secs. then put it back in and it's fine after that.
 

carlhenry

Well-Known Member
Nov 21, 2018
1,506
284
Truck Year
Not Listed
the key was not read right happens once and a wile aka not very often
 
Top