• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Stalling in reverse

S

shortyo

New Member
Joined
Jan 27, 2020
Messages
17
Reaction score
7
Truck Year
2017
Hello all, I have a 2017 1500 ecodiesel with 330,000km and is deleted.
I pull a 23.5ft holiday trailer quite a bit.
I backed up the truck and trailer and it started sputtering and stalled. The check engine light came on and showed P0036 and U1401 codes.
I cleared them and it was running and starting normally.
I can duplicate the stalling by putting it in reverse and stepping on the deal fairly hard...
I was initially thinking Toner Ring and Crankshaft Position Sensor but now I'm not 100% sure...
Any help or advice would be appreciated greatly!
Thank You in advance,
Shorty
 
O2 sensor code and air temp sensor issue from those codes? Did it belch a little puff of soot before stalling, or stay clean? Could it have flooded to a stall, or leaned to one?
 
You must log in or register to reply here.
Back
Top