Joeecodiesel
New Member
- Jan 18, 2020
- 22
- 7
- Truck Year
- 2016
I have a 2016 ecodiesel I purchased with 60k on it back in 2018. When the truck runs it’s great and I actually have quite a few miles on it at this point, but that has not been without what seems like an endless string of repairs and months of being without my vehicle and countless hours of taking time off work to take the truck back-and-forth to the dealership over and over again. At the moment I am currently at a month and a half of waiting to get a diagnosis on my latest issue which is a p016f and p0087 code (fuel pressure related). The dealership had it for about a month before they finally actually looked at it after telling me for about three weeks they are looking at it… it wasn’t until I had to drive out there and literally watch them tow it over to their shop before they finally did anything with it. And unfortunately they ended up doing what they usually do and replaced parts that are cheap and easy but most likely not the actual problem. I have not heard back since he told me that they replaced the tone wheel sensor… Tomorrow I am going to see him in person again because I cannot get a call back after several messages and about five days of waiting… Below is the list of things that have been done to my truck. Mostly under warranty thankfully but some things I have had to pay for myself or pay for the diagnosis fees etc. leading up to the repairs. This truck is completely stock, never modified.
DPF
Diesel particualte sensor x3
DPF injector
Fuel line from pump to rail x2
Side airbags
Valve cover gakset x2
Water pump x2
Front cv axels
Intake manifold x2
Seized glow plug, major 4k repair including new timing chain , head gaskets etc. (replaced all plugs)
Turbo coolant feed tube
Nox sensor x2
Egr cooler
TMap sensor
Turbo
Brake booster vac switch
SCR
DEF Dosing injetor
Backup camera x2
3 way Coolant valve
All of the gaskets and hardware needed to install these items..
im sure im forgetting something..
Now im probbaly looking at a fuel pump and fuel system or possibly just a tone wheel (?)
Hard to say because I can’t seem to get a straight answer.
I could go on and on but long story short, I would recommend avoiding anything FCA (from my personal experience). Not to mention the horrendous customer serivce. Dont get me started on that subject
guess i will just have to wait and see what the dealer says if they ever get to it.. sigh…
DPF
Diesel particualte sensor x3
DPF injector
Fuel line from pump to rail x2
Side airbags
Valve cover gakset x2
Water pump x2
Front cv axels
Intake manifold x2
Seized glow plug, major 4k repair including new timing chain , head gaskets etc. (replaced all plugs)
Turbo coolant feed tube
Nox sensor x2
Egr cooler
TMap sensor
Turbo
Brake booster vac switch
SCR
DEF Dosing injetor
Backup camera x2
3 way Coolant valve
All of the gaskets and hardware needed to install these items..
im sure im forgetting something..
Now im probbaly looking at a fuel pump and fuel system or possibly just a tone wheel (?)
Hard to say because I can’t seem to get a straight answer.
I could go on and on but long story short, I would recommend avoiding anything FCA (from my personal experience). Not to mention the horrendous customer serivce. Dont get me started on that subject
guess i will just have to wait and see what the dealer says if they ever get to it.. sigh…