• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Fuel issues 2014

Mavrik-The-Gent

New Member
Joined
Oct 30, 2021
Messages
6
Reaction score
2
Truck Year
2014
Truck died.
Diagnosed as a bad lift pump. Has less than 2psi.

Couldn't get one, so I installed an air dog aftermarket system, works great.

Upon checking the HPFP I noticed the quality sensor had a metal piece or two on it. So I replaced the pump to avoid any issues.

I also removed the fuel rails and inspected them. One at a time. Found no metal filings.
I removed the fuel filter and found none either.

I now have a crank no start issue. Was told by a local Mopar guy that I could just crank and go.

I've replaced high pressure pumps for Deere and we had to bleed everything.

Ideas?
Fuel pressure regulator?
 
Any ideas? No local shop will touch these trucks so I'm pretty much on my own. The dealers are useless.
 
Back
Top