• Welcome to EcoDieselRam.com We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your EcoDiesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • We believe in quality OVER quantity, and a family friendly place for your #EcoDiesel home!
    CLICK HERE TO REGISTER! Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

SCR Failures on EcoDiesel.

flying7

flying7

Active Member
Jul 15, 2014
175
42
Truck Year
2014
Looking around on Facebook, a lot are having the problem of backorders. This scares me incase I have the same issue!

Who has been affected so far, what are the symptoms.
 
Capri2200

Capri2200

Member
Feb 25, 2015
54
23
Truck Year
2014
If the SCR fails, this is serious and costly. SCR failure can cause the truck to not be drivable. You may be fortunate in that the SCR should be covered under warranty. Not in all cases, but if you keep an eye on the regeneration phases of the truck you may be able to head off serious issues such as this. One indication is getting out your truck and hearing a metal clicking or tapping sound coming form under the truck. This may be a sign of an unfinished or in the process of regeneration cycle. During these cycles the SCR / DPF are very hot (greater than 1000 degrees) and if not properly cleaned by the process or cooled down after the process could lead to failures in the system,
 
BoostN

BoostN

Administrator
Staff member
Administrator
Jul 27, 2013
4,318
1,137
Truck Year
Not Listed
Capri2200 said:
If the SCR fails, this is serious and costly. SCR failure can cause the truck to not be drivable. You may be fortunate in that the SCR should be covered under warranty. Not in all cases, but if you keep an eye on the regeneration phases of the truck you may be able to head off serious issues such as this. One indication is getting out your truck and hearing a metal clicking or tapping sound coming form under the truck. This may be a sign of an unfinished or in the process of regeneration cycle. During these cycles the SCR / DPF are very hot (greater than 1000 degrees) and if not properly cleaned by the process or cooled down after the process could lead to failures in the system,
Click to expand...

Good information, thanks for joining!
 
You must log in or register to reply here.
Top